• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Robert Sorby Precision Combination Chuck SOLD.

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nev

Established Member
Joined
21 Jan 2011
Messages
4,860
Reaction score
16
Location
The green and wetter end of the M4.
Sold under various names, this is a Sorby branded one in its original box.
The pin chuck is missing from the original 'basic set' but this has two additional jaw sets included though they are all the same 'fitting', just different sizes, 1 3/4", 2 1/2" and 3 1/2 inches .
It's basic but more than good enough to start bowl turning.
Also includes a screw chuck.

Threaded 3/4x16 TPI (to fit Record lathes amongst others.

£30 plus £10 p&p (its heavy)
 

Attachments

  • IMG_2583.jpeg
    IMG_2583.jpeg
    652.2 KB · Views: 332
  • IMG_2585.jpeg
    IMG_2585.jpeg
    457.5 KB · Views: 332
  • IMG_2586.jpeg
    IMG_2586.jpeg
    497.7 KB · Views: 332
  • IMG_2587.jpeg
    IMG_2587.jpeg
    534.4 KB · Views: 332
Back
Top