Refurbishing lettering on brass sundial

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MorrisWoodman12

Established Member
Joined
11 May 2017
Messages
532
Reaction score
424
Location
Deepest Sussex
I have a 3mm thick brass sundial plate where I'd like to refurbish the engraved lettering. My current idea is to clean out the lettering as best I can possibly using a brass wire brush and then polish the whole surface. Then paint the lettering black without having to be too careful and then polish the whole thing back again to just leave the paint in the lettering. Unless of course some of you have better ideas:).
Thanks. Martin
20210623_102541.jpg
 
Back
Top