Record power pt 320

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

alanpiercejones

New member
Joined
9 Jun 2022
Messages
2
Reaction score
0
Location
Wales
Hello hopefully someone can help me out on here as I’m out of action without my thicknesser
The thicknesser bed dropped on my pt320 while I was lifting the bed
I’ve found the fault but can’t seem to find it on their blueprints/diagram so up the creak this coming week without it
The part I’m after is a lead screw for the rise/fall mechanism
Has anyone had this happen to them and was able to get one quickly ?
Thanks
Alan
E7FD6017-B333-49CB-B574-20B1D0E6FA37.png
 
Hello hopefully someone can help me out on here as I’m out of action without my thicknesser
The thicknesser bed dropped on my pt320 while I was lifting the bed
I’ve found the fault but can’t seem to find it on their blueprints/diagram so up the creak this coming week without it
The part I’m after is a lead screw for the rise/fall mechanism
Has anyone had this happen to them and was able to get one quickly ?
Thanks
Alan
View attachment 137591
3C32D409-9225-4DE1-919C-7C75F0C74877.jpeg
 
I had a lead screw on another machine let go.....it was rather old and bought it used.....
found that there are a few different types of thread...
Square edge rounded edge etc.....plus metric n imperial....
in the end I bought a new threaded rod and nuts...saying nuts they were like ur's (rounded)...
try these they carry a large stock...
www.ukbolt.co.uk
www.hrs-col.co.uk
 
Back
Top