Record BS300E Blade support shaft

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pops92

Established Member
Joined
10 Oct 2016
Messages
291
Reaction score
74
Location
Boston Lincolnshire
This is the bit I mean. To replace this you have to buy the whole piece at £16.00 plus delivery. Not just the brass bush that holds the revolving black disc. As the bush as got oval wear I wanted to replace it.
But not at £16.00 So £2.50 Ebay 10mm 150mm brass bar and make one. Attached photos hopefully help with how I achieved it without being able turn 16mm brass bar down with a shoulder.
The brass bush is 10mm dia the black blade disc support shaft is 6mm dia. So drilling on my wood lathe was easy. A fine sanding on the 10mm external part was also easy.
Cleaning the ends was easy with a 12mm round cardide wood lathe cutter, cuts brass so easy. This was so easy to make I decided to make 2 while I was set up.
If anyone wants dimensions of the bush just ask.
 

Attachments

  • 20191126_221725-300x480.jpg
    20191126_221725-300x480.jpg
    45 KB · Views: 193
  • 20191228_124707-612x816.jpg
    20191228_124707-612x816.jpg
    166.3 KB · Views: 193
  • 20191228_181007-724x536.jpg
    20191228_181007-724x536.jpg
    91.5 KB · Views: 193
  • 20191228_124457-612x816.jpg
    20191228_124457-612x816.jpg
    128.9 KB · Views: 192

Latest posts

Back
Top