Record 043 - Great plough indeed!

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
DTR":3q1c0qy8 said:
The rods in my MA43 are 0.280" or 7.13mm or 9/32".
Hmm...
9/32" = 7.144mm;
0.280" = 7.112mm;
7.13 = 7.130mm :roll:

I suppose the difference is insignificant #-o

Cheers, Vann.
 
Vann":2ea06miy said:
DTR":2ea06miy said:
The rods in my MA43 are 0.280" or 7.13mm or 9/32".
Hmm...
9/32" = 7.144mm;
0.280" = 7.112mm;
7.13 = 7.130mm :roll:

I suppose the difference is insignificant #-o

Cheers, Vann.

The 0.280" and 7.13mm were taken from micrometers. I haven't checked how accurate my mic's are so that might explain the difference.

I'm assuming that 9/32" was the target size as that's 0.2812".
 
Hmm. Target size might have been 7mm + plating p'raps? I'll have to have a refresher goof at my 043s and remind myself how accurate (or not) a fit the 7mm is. Although it wouldn't surprise me in the least if the Marples size was slightly different again. Thanks, Dave.
 

Latest posts

Back
Top