vala
Established Member
Hello all,
I need to fix some 25mm rebar into oak sleepers (3-4 lengths of rebar into each 2400mm length of sleeper).
The rebar will be approx 125-150mm deep into each of the oak sleepers and protrude around 600-700 and be buried into the ground through a course of pea shingle (approx 50mm) and then a 6:1 lean mortar (approx 100mm).
Would a polyester resin from the likes of Fischer or Rawlplug do the job here? I see they note for use in concrete/masonry however I'm struggling to find anything that specifically says can be used in timber.
I've got around 16 lengths of sleepers to do the above method to, and then 3-4 which will be double stacked so 100-150mm of rebar into both pieces of timber, so looking for the right adhesive to use as well as be as economical as possible.
I need to fix some 25mm rebar into oak sleepers (3-4 lengths of rebar into each 2400mm length of sleeper).
The rebar will be approx 125-150mm deep into each of the oak sleepers and protrude around 600-700 and be buried into the ground through a course of pea shingle (approx 50mm) and then a 6:1 lean mortar (approx 100mm).
Would a polyester resin from the likes of Fischer or Rawlplug do the job here? I see they note for use in concrete/masonry however I'm struggling to find anything that specifically says can be used in timber.
I've got around 16 lengths of sleepers to do the above method to, and then 3-4 which will be double stacked so 100-150mm of rebar into both pieces of timber, so looking for the right adhesive to use as well as be as economical as possible.