• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Quick release vice just too tedious? This is for you :)

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Trevanion

Greatest Of All Time
Joined
29 Jul 2018
Messages
3,764
Reaction score
561
Location
Pembrokeshire
I wouldn't mind a pneumatic wood vice that slammed shut when you hit the valve. FINGERS! :lol:
 

Bod

Established Member
Joined
18 Nov 2013
Messages
1,052
Reaction score
45
Location
Wiltshire.
Trevanion":2ye8ebop said:
I wouldn't mind a pneumatic wood vice that slammed shut when you hit the valve. FINGERS! :lol:
Worked for a while with an engineering vice, that had an air cylinder, in place of the screw, developed for disabled use.
That thing gripped!!! Bang ON, crash OFF! No finesse, got thrown out as too dangerous in the end.

Bod
 

Hugopuk

Member
Joined
1 Nov 2018
Messages
18
Reaction score
1
Location
Keighley
My desire to own one of these or any multitude of shiny workshop kit is inversely proportional my need for it, it does look good though you have to admit.
 

Benchwayze

Established Member
Joined
10 Mar 2007
Messages
9,450
Reaction score
108
Location
West Muddylands
An improvement I dreamed about was a mini-chain morticer; about the size of the domino with interchangeable bits. Operating on the plunge like a domino. That's what I call overkill. :mrgreen:

John (hammer)
 

Suffolkboy

Established Member
UKW Supporter
Joined
18 Aug 2014
Messages
354
Reaction score
64
Location
Lancashire
I'm always looking for ways to save time in the workshop.

With this tool I can easily reduce my vice closure time from three quarters of a second to a quarter of a second. That's a half a second saving.

if I value my time at say £50 per hour, that's a saving of 0.03p (rounded up) per vice closure.

That means I would only have to open and close the vice 8795 times and it's paid for itself!

No brainer really.
 
Joined
13 Jul 2015
Messages
2,852
Reaction score
115
Location
Suffolk
Suffolkboy":33fcxljq said:
I'm always looking for ways to save time in the workshop.

With this tool I can easily reduce my vice closure time from three quarters of a second to a quarter of a second. That's a half a second saving.

if I value my time at say £50 per hour, that's a saving of 0.03p (rounded up) per vice closure.

That means I would only have to open and close the vice 8795 times and it's paid for itself!

No brainer really.
You forget the cool cogs that you can see spinning behind the clear plastic
 

Rich C

Established Member
Joined
22 Aug 2019
Messages
372
Reaction score
36
Location
Manchester
transatlantic":2l6g5yag said:
You forget the cool cogs that you can see spinning behind the clear plastic
The clear plastic that will likely crack within a few years... :|
 

Latest posts

Top