Question for Festool LR32 Owners

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Neocleous

Established Member
Joined
23 Jul 2019
Messages
70
Reaction score
3
Location
Warrington
Hi everyone,

I am building my first project with the LR32 which happens to be a cabinet for my systainers.

looking at the instructions for the sustainer drawers the first row of holes needs to be 57mm from the front which is fine because I can do that with the parallel stops. The second row of holes needs to be 282mm from the front. On my cabinet that’s approximately 117mm from the back which is beyond the range of the parallel stops.

How do I accurately place the second row of holes?

Thanks
 
Here's a Festool video that shows how to do this for the SYS-AZ drawers. The description for the back row of holes starts at about the 12-minute point.

 
Got it that makes sense, I was hoping for something better than striking a line but once it’s done once and you set the parallel stops it’s quick and easy.
 
Back
Top