PVA Glue Going Black on Oak

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Togalosh

Established Member
Joined
22 Sep 2011
Messages
513
Reaction score
5
Location
Enclave Des Papes, France
Hello Gents,

I understand that tannins in Oak react with iron but can someone enlighten me as to why PVA glue turns black too- but only sometimes ?..I'm pretty sure it doesn't happen all the time.

I know that it should not matter as my joints should be as tight as a gnats chuff so as not to show the glue line ...but there's little chance of that just yet although I am improving very quickly nowadays.

Thanks.
 
Not sure but for some reason my hands go a purple/black like biro pen is all over them when I handle fresh sawn/planed Oak.

It stains my hands for days sometimes and can transfer back onto the Oak itself. I'm not sure what causes it.
 
James C":16qw5kf1 said:
It stains my hands for days sometimes and can transfer back onto the Oak itself. I'm not sure what causes it.

I'm lead to believe that there is a small amount of uric (sp?) acid in our sweat and this reacts with the tanin turning hands black.

When it transfers back onto the oak it's not a problem and easy enough to do that final clean before gule up.

Not sure about the original question though, - I've had PVA squeeze out look black on oak after it's dried. No obvious iron contact - perhaps something in the glue?
 
phil.p":16uyiqcv said:
I've got some everbuild D4, which is brilliant stuff but smells quite acidic - I'll have find a couple of scraps to try it on.
I use that stuff as well and agree, it's great, but in my experience it doesn't turn black on oak - Rob
 
woodbloke":23k2wjgi said:
phil.p":23k2wjgi said:
I've got some everbuild D4, which is brilliant stuff but smells quite acidic - I'll have find a couple of scraps to try it on.
I use that stuff as well and agree, it's great, but in my experience it doesn't turn black on oak - Rob

I agree
 
you weren't clamping the boards edge to edge were you? I've had this before where the clamp touches the wood and glue resulting in a small black mark

Sent from my Desire HD using Tapatalk 2
 
MattMoore":yg4mjmyh said:
you weren't clamping the boards edge to edge were you? I've had this before where the clamp touches the wood and glue resulting in a small black mark

Sent from my Desire HD using Tapatalk 2

That happens alright..
 
:oops: what a plonker I am...I've sussed it out thanks to your help.

..I lost my usual glue bottle nozzle cap & used a steel bolt instead (as a stopper) which has gone rusty.. you get the rest.

It's not funny how a little lack of foresight can cost a lot of grief... & that wisdom is hard won.

Thanks guys.
 
Togalosh":188pejxe said:
:oops: what a plonker I am...I've sussed it out thanks to your help.

..I lost my usual glue bottle nozzle cap & used a steel bolt instead (as a stopper) which has gone rusty.. you get the rest.

It's not funny how a little lack of foresight can cost a lot of grief... & that wisdom is hard won.

Thanks guys.
=D> =D>
 
Back
Top