Post a photo of the last thing you made

[Penny]

A Pace Stick stand made for an old boss' husband who has just been made a Sergeant Major. Most of those that are made are a simple base and two boards standing at 90 degrees with a notch in them and have burgundy felt to protect the Pace Stick. I've added a WW2 REME Capbadge and a current one. A mobile phone rest is at the back. A brass name plaque will be added by his wife. It's made in White Oak and stained cherry because Cherry is very expensive, especially for the thickness I needed.*

* A Pace Stick, for those that don't know, is the 'stick' that Sergeant Majors carry around with them. It is seem as one of the accoutrements of office. It opens up to be used for measuring the 'pace' or 'step' during foot drill.

 

[stuffimade]

I made this desktop monitor riser

(build video is here if you have a few minutes spare - https://www.youtube.com/watch?v=B-oxb3-_9Ks)

 

[Doris]

I could do with one of them monitor risers for my desk.

Here's a Key box I made as well that I recently completed. Painted a nice design for the front too on a piece of glass.

 

[monkeybiter]

That's an attractive keybox Doris, nicely executed design on the glass too.

 

[Woodchips2]

Well done stuffimade, I enjoyed the video too =D> =D> The keys and the dowels finish it off very well.

Regards Keith

 

[Emanuel]

Working at a staircase renovation project. Doing the string cladding.

 

[scosarg]

http://www.youtube.com/watch?v=-dsYdFFHPto

 

[Steve Jones]

I've been messing around with fonts on the cnc this morning getting ready for a forthcoming project.
The font used is liffey which has been V carved using a 22mm 60 degree bit letters were sprayed in using Chestnut ebonising lacquer

Sent from my GT-I9305 using Tapatalk

 

[Phil1975]

I am fairly new to the forum & woodworking in general.
I am now in the fortunate position where I have been able to borrow a workspace & begin to make something.
I appreciate that none of what I have made is anywhere near the level of most of what I see on this site, but we all have to start somewhere & I am happy so far, although I feel I am at the bottom of a very steep learning curve.

First came the coffee table, mainly made using hand tools.

Then came the cupboard, made from recycled window sills. I really bit off a bit more than I could chew, but I got there in the end.

Last week I made the book stand, as a Birthday present.

Finally the best thing I have made to date, which arrived on Wednesday, so no more woodwork for a few days!

 

[DiscoStu]

Ah! Sweet!

If I'd have made the cupboard or the table as my first projects I'd have been very proud - they look fab! Well done.


Sent from my iPhone using Tapatalk

 

[Racers]

Really like your work, mind you I don't think you claim all the credit for the last one!

Hand tools are quiet so you should be able to do a bit between feeding and sleeping.

Pete

 

[Racers]

Another Birch and Oak box with a flip up lid.

Birch Burr and Oak box with flip up lid by Racers, on Flickr

Needs another coat of wax on the inside.

Birch Burr and Oak box with flip up lid by Racers, on Flickr

Hand tool porn!

Record 043 with short fence rods cutting the grove for the bottom by Racers, on Flickr

Pete

 

[Wuffles]

Another Birch and Oak box with a flip up lid.

Birch Burr and Oak box with flip up lid by Racers, on Flickr

Pete

Do we ask how stuff was done on this thread? I LOVE that flip up lid. I can make doors that end up looking like that very easily, but intentionally? How?

 

[Racers]

It's made from a thicker piece of wood with most of the waste bandsaw off and the corner shaped with rasps files sandpaper scrapers etc.
The birch is very soft so it gets a coat of superglue to harden it.

Pete

 

[Wuffles]

It's made from a thicker piece of wood with most of the waste bandsaw off and the corner shaped with rasps files sandpaper scrapers etc.
The birch is very soft so it gets a coat of superglue to harden it.

Pete

Thanks Pete, I suspected that was the case, but thought I should check in case you said - "yeah, I simply steamed the corner and used a thigamebob to raise it", or something else that made me look like a total novice.

Love it. Cheers.

 

[Woodchips2]

Well done Phil1975, lovely woodwork and congratulations on the new arrival =D> =D> =D>

Regards Keith

 

[Gianluca]

Hello everyone,
this is my first post here, and this is one of the clocks i make as an hobby

 

[DTR]

Gianluca, please tell me all those gears are functional! It looks amazing, good work!

 

[DTR]

Phil1975, great stuff! =D>

 

[custard]

Another Birch and Oak box with a flip up lid.

That is seriously special! Very well designed and very well executed.

=D>