porter cable guide bushes

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

roby

Member
Joined
18 Feb 2012
Messages
8
Reaction score
0
Location
hampshire
Hello all i recently bought a bosch guide bush adaptor so i could use threaded bushes and a set of silverline pc style brass bushes but they're just a bit too big for the recess in the adaptor,the problem is ,is it the bushes that are too big or the adaptor that is too small.I can get a set of pc bushes for around £35 but now i'm not sure if they will fit.Does anyone know the overall diameter of pc bushes if so it would be a big help as then i could measure the recess in the adaptor.Thanks all Rob
 
I have two PC style bushes that fit my Flex router which is the European brand of PC routers.

The threaded portion measures 1.184" and the diameter of the large collar measures 1.374"
I would assume therefore the working dimension of the adaptor should be 1-3/16" and 1-3/8" respectively.

hth

Bob
 
Thanks Bob that's what i was looking for now i can check the silverline bushes. Regards Rob
 
Back
Top