Poolewood 28-40

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

skintknuckles

New member
Joined
7 Jan 2021
Messages
2
Reaction score
0
Location
Hertfordshire
Good evening
I have a Poolewood 28-40 mechanical lathe,can anyone help me out with the wiring from the on /off switch that then goes to a 10 amp contact box?
From there it goes to the supply feed and motor.
Many thanks
 

Attachments

  • 7AE3A19B-7F15-4863-9C02-54DD57A71DEF.jpeg
    7AE3A19B-7F15-4863-9C02-54DD57A71DEF.jpeg
    93.4 KB · Views: 5
  • F45F7689-0215-402E-9302-62B2CD988D40.jpeg
    F45F7689-0215-402E-9302-62B2CD988D40.jpeg
    134 KB · Views: 6
  • 0ACB93C5-B7A0-4EDD-A0A6-F86C0DF7EBFC.jpeg
    0ACB93C5-B7A0-4EDD-A0A6-F86C0DF7EBFC.jpeg
    88.8 KB · Views: 7
  • AE0996F0-31EF-4E5C-AE46-0621E9AD7C6E.jpeg
    AE0996F0-31EF-4E5C-AE46-0621E9AD7C6E.jpeg
    74.5 KB · Views: 6
Is it not working? I believe its probably just a no-volt style safety switch so should be easy to replace. Often the contacter bit is built into an on/off switch you can buy.
 
Back
Top