Pen Making problem.

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Lee J

Established Member
Joined
20 Nov 2008
Messages
551
Reaction score
0
I've just started turning some pens, relatively straight forward job but sometimes when I've turned down to size I notice a crack on the ends or splits ? what causes this ? lathe to fast? heat? I'm lost because it happened on 3 out of the 6 blanks I turned, 2 were spalted birch and the other was maple.
 
If you post this in the turning section you'll probably get a better response.

I don't know the answer
 
Back
Top