Parkside (Lidl) track saw

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

galleywood

Established Member
Joined
24 Feb 2015
Messages
397
Reaction score
28
Location
Chelmsford
Does anyone know the spec for the blade clamping screw, and is it RH or LH thread?

I am struggling to remove the screw, to change the blade, and the hex socket in the screw seems to be soft.

I will have to replace the screw, so if anyone knows where I can get a replacement, I would very much appreciate it.
 
I have a spare one, I think. I'll check it for you later.

If it's still there you can have it. I upgraded a while back.
 
Surprise, surprise, It was exactly where I thought it was.

It's righty tighty .

IIRC I had to use a new one every time I changed the blade.
 
Back
Top