Owners of Clarke CTS10D / CTS11- Help please?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GarFin

New member
Joined
15 Jun 2020
Messages
4
Reaction score
0
Location
Australia
Hi Everyone, from the other side of the world.. I've recently come into possession of what looks to be a de-branded Clarke tablesaw, and from what i can figure, its probably based on the CTS10D or CTS11 .. either way , its missing its bladeguard/riving knife.. does anyone have one laying around (just that mounting bracket/knife) that they could throw under their printer/scanner and scan it (along with a coin , for scale reference?) and attach the scan, here ??

Thanks in advance,
Gar.

Stay Safe.. #Covid.
 
img821.jpg
Here's a CTS10D replacement riving knife, sourced from Machine Mart.
The calipers have been opened to exactly 50mm.
Hope this is OK - if you want other scans or dims just holler.
Martin.
 

Attachments

  • img821.jpg
    img821.jpg
    71.5 KB · Views: 110
..and if it's of any interest, the knife is stamped
" t2 43HRC+-5HRC"
Though quite why the knife needs to be of a specified hardness I've no idea.
Martin.
 
...and it did.

Cut from an old mitre saw blade , its 2mm thick and tough as.
Calipers set to 50mm if anyone ever wants to replicate.

Thanks again Martin.

Rgds Gar.
 

Attachments

  • B&W-0001.jpg
    B&W-0001.jpg
    243.7 KB · Views: 16
Glad that it all worked out OK Gar.

The orginal is exactly 2mm thick also.

Happy sawing,

Martin.
 
Back
Top