Hudson Carpentry
Established Member
Its been long time coming for me to build myself another router table thats actually of some decent quality and size.
Been meaning to do it for a year and buy a 2nd Trend T11 to put into it. However the recent purchase of the big Triton from a member on here has prompted me to make a start.
First of all the size. Finished size to be 830x1000x650 HxWxD.
The carcuss is 22mm Ply.
I have cut all to size and routed the housing joints and rebates.
Here is the carcass only dry assembled
I have screw and glued but its looks the same as it did when dry assembled :roll:
Been meaning to do it for a year and buy a 2nd Trend T11 to put into it. However the recent purchase of the big Triton from a member on here has prompted me to make a start.
First of all the size. Finished size to be 830x1000x650 HxWxD.
The carcuss is 22mm Ply.
I have cut all to size and routed the housing joints and rebates.
Here is the carcass only dry assembled
I have screw and glued but its looks the same as it did when dry assembled :roll: