Good evening all,
I'm a long time lurker but only now getting around to contributing (hopefully). I'm in the planning stages for a while now and have a few questions I'm hoping some of you fine people can help me with.
I'm a reasonably competent all round diy'er and this will be a 1 man self build but some of the detail has me a bit stumped at the moment.
Structure is going to be 9.6m by 4.8m outside measurements. 2x4 stud framed walls with a flat epdm roof. and larch clad. My first question is around the stud spacing. I'm thinking 400mm on centre, with 18mm OSB on the inside as lining as well as acting as a vapour barrier. The OSB comes in measurements of 2440x1220mm. Does this work for 400mm centres, I mean in regards the sheets lining up half way over each stud? Hope this makes sense to someone lol...
I'm a long time lurker but only now getting around to contributing (hopefully). I'm in the planning stages for a while now and have a few questions I'm hoping some of you fine people can help me with.
I'm a reasonably competent all round diy'er and this will be a 1 man self build but some of the detail has me a bit stumped at the moment.
Structure is going to be 9.6m by 4.8m outside measurements. 2x4 stud framed walls with a flat epdm roof. and larch clad. My first question is around the stud spacing. I'm thinking 400mm on centre, with 18mm OSB on the inside as lining as well as acting as a vapour barrier. The OSB comes in measurements of 2440x1220mm. Does this work for 400mm centres, I mean in regards the sheets lining up half way over each stud? Hope this makes sense to someone lol...