mystery object...

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Gavlar

Established Member
Joined
16 Dec 2020
Messages
91
Reaction score
31
Location
Suffolk
hi all

This came in a box of random stuff. From the keyed bore, it's intended to go onto a shaft. Diameter is about 3" and the bore 3/4". What is it?

Somebody out there has the answer...

IMG_20210505_190756484.jpgIMG_20210505_190834950.jpgIMG_20210505_190830908.jpg
 
choices, choices...thanks for your ideas

I had to look 'metal spinning' up. Another interesting process. I can't see an immediate use for a 3" metal cone that this tool would produce, but you could be right.

The keyway does suggest that this tool is designed to be driven, but it doesn't go on a normal lathe spindle as it's not threaded.

Looking at pics of conical clutches, they are quite a lot more truncated than this thing.

still searching for answers...
 
Metal spinning forms are normally (in my limited experience) threaded internally and screw directly onto the spindle nose.
 
Here's another one for you...a set of discs that fit a 2" die wrench. Square, slightly tapered holes through the centre ranging from 1/4" to 1.1/8" in 1/16" steps, although I'm missing some by the looks of it.
1. dies for reducing square bars in size?
2. means of twisting square bars into barley twist shapes?
3. means of holding other tools with tapered square shanks in a die wrench?IMG_20210507_093505166.jpgIMG_20210507_093514184.jpg
 
Here's another one for you...a set of discs that fit a 2" die wrench. Square, slightly tapered holes through the centre ranging from 1/4" to 1.1/8" in 1/16" steps, although I'm missing some by the looks of it.
1. dies for reducing square bars in size?
2. means of twisting square bars into barley twist shapes?
3. means of holding other tools with tapered square shanks in a die wrench?View attachment 109938View attachment 109939
My guess is they're for holding a tap in a die wrench?
 

Latest posts

Back
Top