Mitre guide needed but from where?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
A

Anonymous

Guest
Hi all

The NYW (modified) router table is very nearly completed and what I now need to find is an adjustable width 3/4" mitre guide. Typically these have nylon washers or small screws in the side for adjustment to take out slop
Where can I get a reasonable one in the UK?
 
Hi Tony,

How about one from our favorite manufacturer, Incra? I'm very tempted too - expensive, but worth it if you ask me.

Cheers,
Neil
 
Tony,

I find that if I make wooden runners in a decent bit of straight grained wood they work just fine. You can screw basically anything you want to the top of them.
 
Incra also do the sliders without the mitre gauge, but it may be difficult to get hold of one - maybe WoodworkersWorkshop?

Neil
 
Back
Top