• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

For Sale Mejix Floorstanding Lathe with Duplicator 240v

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dokkodo

Established Member
Joined
8 Jan 2017
Messages
298
Reaction score
21
Location
Bristol
Listed this on ebay recently but the deal fell through. I bought this a few months ago for one job with repeat components, but i already owned another lathe, and I dont have room for both sadly.

Its a heavy duty floorstanding beast, all very solidly made. Mejix are a french brand, pre-chineseum.
1 metre between centres, with tool rest, work support, drive centre and 4 jaw chuck (came with it, not tried using it). It also has cover to go over the motor/belts.
The chain driven duplicator holds the tooling and runs along a chain, referencing a template attached to a bar via a wheel attached to the tool holder. The tooling is a V block, which was quite badly ground when i got it, but can easily be shaped and honed, and i was thinking it wouldnt be at all difficult to make up some tooling that held carbide cutters which might work better/be more adaptable.

Will also work perfectly well as a standard non-copy lathe, the duplicator unbolts very easily.

Im only after what i paid for it, which was £400.

Collection would be near Yate, south glos. Could palletise if you want to arrange shipping, we have a forklift.


Cheers

IMG_4300.jpg
IMG_4301.jpg


IMG_4303.jpg

IMG_4304.jpg
IMG_4207.JPG


IMG_4205.jpg
 
Back
Top