LUREM S A R 400 Band saw

[french phil]

Greetings,
As a new old boy on the block I have been searching the forums for any information on the above machine as I have recently acquired one. Any help in setting up and operation would be greatly apprecated, copy of a hand book would most helpful. I do know that the machine is French and the company was a well respected manufacture but has been absorbed into another company. So that it makes a bit more sense I should point out that I live in Normandy France

French Phil (hammer)

 

[orchard]

Welcome!

May be a manual in here (thanks to another good UK site) mate:

http://passion-usinages.forumgratuit.org/f23-machines-outils-manuels-docs

 

[french phil]

Many thanks for the link, found the hand book, now need to get it into english !!!

 

[Alexam]

Hi French Phil.

You may have seen this https://www.youtube.com/watch?v=wGbZqWac0jU
but if you haven't, it is the way to st up your bandsaw. Blades are the most important and I use the ones from TuffSaw, as they are the best http://tuffsaws.co.uk/

THis link may also help http://www.manuals.club/document.php?id ... D956zwg9tf

Hope this helps and welcome to the forum

Alex