Looking for small part turned :) DAFT PUNK

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FIREWIRE

New member
Joined
30 Sep 2011
Messages
2
Reaction score
0
Location
Scotland
Hi guys/gals :)

I have just completed a summer long project creating a replica Daft Punk Helmet

The issue now, is that i must make the 2 ear pucks on either side.

I have attempted several times to do this but without the correct equipment and materials i have failed. :(

This is hopefully where your expertise will help me greatly.

Basically i am looking for someone to make this part. it measures around 80mm x 40mm.

I would be looking for it to be made of a plastic or similar hard material without a grain. Im looking for only one to be made so i can then mold the part in silicone and create reproductions in Polyurethane.

Thanks in Advance :D

Michael
 
hi micheal i can do this for you, have pm'ed you my email, send me some pics and info

adidat
 
Back
Top