Space in the workshop is always at a premium so i came up with this idea popped to my local carpet wharehouse and asked for a couple of cardboard inner rolls which they were only too glad to let me have saved filling there skip I cut them into 500 mm lengths and glued them togeather at the sides then glued this to two strips of 2x1 drilled 6 12mm holes on the oppisite side of tubes in line with 2x1 then 6 5mm holes in 2x1 to corrispond with12mm holes i then screwed this to the ceiling in my work shop ideal to store strip wood and out of the way The other idea i had when i saw some electrical overhead tray being disguarded thought that will do for a perfect tool wall only had to ask they gave me 4 of 1.5mt lengths 600 wide jobs a good en