Knock down joints

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Neil,

At first galnce these seem to be spot - will have a more detailed look later today - thanks for the help
 
Dave_G

I've used the ones that Neil's suggesting (plus others from the Screwfix range). All worked well. I would recommend using a drill press to ensure the pilot holes are vertical.

There is also some mild brakout of the Contiboard surface if you're not careful...assuming that's what you are using, of course. Never found a simple cure.

Roger
 
Back
Top