Kity 612 Bandsaw on/off switch

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

fuzzyfozzy

New member
Joined
16 Apr 2019
Messages
4
Reaction score
0
Location
Kinross
Hi, new to using forums, so please bear with me. I have a Kity 612 bandsaw and the original rotary on/off switch packed up, disintegrated and has been binned a while back. It appears that original replacements are not available so wonder if anyone knows of a good replacement and can give me precise details. Thanks in hope :D
 
I've tried one like this with a fifth pin to accommodate the extra black wire, but it trips my circuits which ever way I wire it. It seems too simple for an induction motor, but thanks
 
Three input (240v) and four to the motor - it has a Capacitor(?) on it which demands a different arrangement of wiring, but I don't know what switch will do. Have also tried the one you indicated and it does not work either.
 
This may help you as to what the various wires are for.....?

Its a wiring diagram for a Kity 612, to suit either single phase or 3 phase.

9015510066_ed66654bd5_z.jpg
 

Attachments

  • 9015510066_ed66654bd5_z.jpg
    9015510066_ed66654bd5_z.jpg
    70.8 KB · Views: 83
Back
Top