Kity 419 Tenoning Device

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

llangatwgnedd

Established Member
Joined
17 Sep 2002
Messages
1,136
Reaction score
335
Location
Castell Nedd, De Cymru
Hi, been looking on the new Kity website and noticed that they sell a tenoning device for the 419

Has any got one of these if so what they like i.e. cast iron ?

So I take it that the blade guard can be removed and that the riving knife is lower than the top of blade just like the eb pk 2000 table saw?

http://www.kityuk.com/machines/kity419.html

Cheers

EDIT

The riving knife can be lowered as in manual page 16 fig. 7.2
 
I think you will find it is actually a finger jointing jig that uses a grooving cutter (listed further down). No CI maybe a bit of cast alloy if you are lucky :lol:

Jason
 
Thanks Jason, I know that there is a few kity 419 users here on the forum and are hoping that they can tell me a bit more on the riving knife question i.e. can the riving knife be lowered?
 
Back
Top