artie
Sawdust manufacturer.
I have a Jet table saw JTS-600XM. Its done a fair bit of work.
It has become somewhat noisy when running.
Turning the blade slowly by hand, there is a click every half rotation of the blade. I can move the blade back and forwards maybe one eight turn before I pick up the slack.
I'm very busy at present working 12 hour days so don't want to mess with it unless necessary.
However if the wisdom of the board says it needs attention then it would benefit me to look into it before it becomes a bigger problem.
It has become somewhat noisy when running.
Turning the blade slowly by hand, there is a click every half rotation of the blade. I can move the blade back and forwards maybe one eight turn before I pick up the slack.
I'm very busy at present working 12 hour days so don't want to mess with it unless necessary.
However if the wisdom of the board says it needs attention then it would benefit me to look into it before it becomes a bigger problem.