Is it possible.......

woody67 · 12 Jun 2013

.....to build a garden shed using ONLY marine ply?

Odd question you may ask, but I've got the chance to get a shed load (excuse the pun) of 8 x 4 plywood sheets - gratis,from a job site at work. Would lamination prove suitable for the frame etc?

It WOULD prove a challenge, but I'm always up for one!

Thanks

Woody

No skills · 12 Jun 2013

I would imagine so, the ply faces will need to be clean enough for gluing (not to mention fairly dry) - and that's going to be a lot of ripping to make enough bits for frame work. Surely buying some 2x2 or 2x3 for the frame would be cheaper than spending all that time and buying all that glue.

Jamesc · 13 Jun 2013

I would have thought very do-able, why not make it as a series of torsion boxes, you wouln't need to worry about frame work then.

James

woody67 · 13 Jun 2013

Jamesc":3h7jo0g1 said:
I would have thought very do-able, why not make it as a series of torsion boxes, you wouln't need to worry about frame work then.

James

Prithee tell more kind Sir 8)

Jamesc · 13 Jun 2013

Hi Woody,

You could make a series of boxes with a skin of ply on either side and a series of strips say 2" wide in between to make up the boxes. Depending on the tickness of ply you could probably get a way with having the stips just run vertically. If you offset the inside and outside panels you could easily join the boxes together. It would take a little working out but should end up with a very strong and rigid shed. Something like the sketch below. The roof could be made in the same way. If you wanted to get realy clever you could fill the voids with insulation.

woody67 · 13 Jun 2013

Thanks James my man,

To be a real miser, I suppose I could get away with slate lathes .?? :!:

I've been offered as many sheets as I want - the sheets have been used for screening/fencing and presume they won't pass muster with the Elf & Safety bods!

I've nowt to lose if it doesn't pan out......my bro in law needs some new shed roofing anyhoo!

Thanks again,

Mark.