Inlay banding part deux

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

andersonec

Established Member
Joined
25 Jun 2010
Messages
1,443
Reaction score
0
Location
Lincolnshire
Right then, the two strips were glued up and left to dry, they are then taken out and one side planed to straighten it, then put through the band saw to parallel the other edge
Honnds tooth 4.jpg

This strip is then crosscut on a little jig for the band saw (very quick to make) and flipped over after each cut to produce little pyramid shaped strips, place a stop block to give the exact cut, this is easy to line up.
Hounds tooth 6.jpg

Hounds tooth 7.jpg

Hounds tooth 8.jpg

Hounds tooth 10.jpg

These are then sorted into two piles, Walnut outer in one pile etc. count one pile and lay out half that amount, this will be the length of the outer strips you now need to do.
Hounds tooth 11.jpg

Hounds tooth 12.jpg

these measure 300mm (remember we started with a 900mm long piece). I used two pieces of maple veneer and one piece of Walnut veneer for these, 300mm long and a little wider than your pyramids, these are glued together to give you the outer lines, I think just one brown line against the white is very neat.
Hounds tooth 13.jpg

Run out of space for any more pictures, see next post for part 3
 

Attachments

  • Honnds tooth 4.jpg
    Honnds tooth 4.jpg
    41.5 KB · Views: 730
  • Hounds tooth 6.jpg
    Hounds tooth 6.jpg
    31.3 KB · Views: 747
  • Hounds tooth 7.jpg
    Hounds tooth 7.jpg
    38.7 KB · Views: 729
  • Hounds tooth 8.jpg
    Hounds tooth 8.jpg
    42.2 KB · Views: 744
  • Hounds tooth 10.jpg
    Hounds tooth 10.jpg
    32.6 KB · Views: 719
  • Hounds tooth 10.jpg
    Hounds tooth 10.jpg
    32.6 KB · Views: 746
  • Hounds tooth 11.jpg
    Hounds tooth 11.jpg
    46.7 KB · Views: 748
  • Hounds tooth 12.jpg
    Hounds tooth 12.jpg
    33.8 KB · Views: 731
  • Hounds tooth 13.jpg
    Hounds tooth 13.jpg
    38.5 KB · Views: 729
  • Hounds tooth 14.JPG
    Hounds tooth 14.JPG
    86.1 KB · Views: 719
Back
Top