Drew
Established Member
Some time in the near future I'm going to have to assemble the following and I was wondering if any of you would be kind enough to tell me the sort of time I will have to expect to take doing this. Also if anyone had any hickups assembling them that I could avoid or any advice on going about it.
A 10" SIP planer /thicknesser
A 14" SIP bandsaw (both of which are sitting in the front room at the moment waiting for the workshop roof going on).
and last and definitely not least
an Xcalibur 804 (when it gets delivered at the end of May).
It sounds petty I know but once I start something like this I really want to get to use the thing as fast as possible.
Ta
Drew
A 10" SIP planer /thicknesser
A 14" SIP bandsaw (both of which are sitting in the front room at the moment waiting for the workshop roof going on).
and last and definitely not least
an Xcalibur 804 (when it gets delivered at the end of May).
It sounds petty I know but once I start something like this I really want to get to use the thing as fast as possible.
Ta
Drew