I Bought a Track Saw...

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Marineboy

Established Member
Joined
11 Mar 2016
Messages
562
Reaction score
12
Location
Northumberland
MFT top definitely a good investment. About £50 from CNC machining suppliers, one in Wrexham I think. With one of those and a set of parf dogs you won’t need a square to cut dead on accurate cross cuts, both at right angles and 45 degrees.
 

DBT85

Established Member
Joined
19 Dec 2015
Messages
1,820
Reaction score
634
Location
Pershore, Worcester
Marineboy":1q23rnc9 said:
MFT top definitely a good investment. About £50 from CNC machining suppliers, one in Wrexham I think. With one of those and a set of parf dogs you won’t need a square to cut dead on accurate cross cuts, both at right angles and 45 degrees.

I think they are on ebay from a reputable place for £43 posted. I'm looking at a set of fence dogs and a fence with stop from bench dogs.co.uk.

Accurate, square, repeatable.

Need to design the rest of the bench it'll sit on first :lol:
 

PeteG

Established Member
Joined
9 Jun 2013
Messages
998
Reaction score
2
Location
Manchester
I couldn't do without my bench top, it's a bit over the top with three layers of 18 mm MRMDF and it could do with being a little wider.
And I can't say how accurate it would be for use with the track saw, but for everything else...

MFT One.jpg


MFT Two.jpg
 

Attachments

  • MFT Two.jpg
    MFT Two.jpg
    999.1 KB · Views: 255
  • MFT One.jpg
    MFT One.jpg
    1,007 KB · Views: 253
Top