Hybrid burr oak bottle stopper

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cornucopia

Established Member
Joined
21 Jul 2008
Messages
2,056
Reaction score
0
Location
Leicestershire
Hello folks

I'm proud to present my first ever stopper!!
Hybrid burr oak/resin
pictured with its "twin" blank which was cast at the same time
P1170403.jpg
 
Thank you for your comments

On this one I sanded fom 240 to 600 with abranet then I used 3 types of buffing compound then a few coats of MC wax- you could use CA/BLO or spray laquer then just run the final mop over it and then MC wax
 
Back
Top