As it says, I've jointed everything up ready for gluing but the horns out of the vertical rails prevent the Bessey clamps being positioned central to the horizontal rail. If I do put them above the horn it does not pull the joint out of square.
I had thought about making some slips of wood wider than the protruding horn above and below the horn but this is going to be very difficult to position correctly without gluing them to the rail. Also using PU glue so I don't have much time to fiddle with packing on all four corners.
Any easy suggestions?
Richard
I had thought about making some slips of wood wider than the protruding horn above and below the horn but this is going to be very difficult to position correctly without gluing them to the rail. Also using PU glue so I don't have much time to fiddle with packing on all four corners.
Any easy suggestions?
Richard