Birdman
New member
Hi,
I'm in the throes of making my own 800mm x 600mm Valchromat based router table top incorporating the Triton MOF001, the matching Incra insert plate (with the support underneath for the adjustment screws to rest on) and the Trend back fence (RT/FENCE/A).
When fitted to the Trend table tops, the fence slides into 2 slots in the table top which go right through the entire depth of the top. I want to use T track and so I've had an email exchange with Trend to confirm that it should be possible to adapt the fence by replacing the fittings.
Could anyone with access to the Trend fence please advise what type of bolt/fixing goes into the tall locking knob, or what I'd need to get it to fit T track. I've tried to work it out from Trend's exploded views of spare parts but it's not giving me enough detail.
Many thanks in advance...
I'm in the throes of making my own 800mm x 600mm Valchromat based router table top incorporating the Triton MOF001, the matching Incra insert plate (with the support underneath for the adjustment screws to rest on) and the Trend back fence (RT/FENCE/A).
When fitted to the Trend table tops, the fence slides into 2 slots in the table top which go right through the entire depth of the top. I want to use T track and so I've had an email exchange with Trend to confirm that it should be possible to adapt the fence by replacing the fittings.
Could anyone with access to the Trend fence please advise what type of bolt/fixing goes into the tall locking knob, or what I'd need to get it to fit T track. I've tried to work it out from Trend's exploded views of spare parts but it's not giving me enough detail.
Many thanks in advance...
Last edited:
