Henry Taylor Hollowing Tool

[mayo.mick]

I've just got a Henry Taylor Hollowing Tool delivered, but I've yet to get time to try it out. Can anyone tell me, will the Robert Sorby carbide tips fit it? I can't seem to find any replacement or different cutting tips for it.

 

[Lazurus]

When I used a similar tool I made my own tips from HSS from Fleabay.

 

[Robbo3]

The Toolpost have Sorby tips which might fit. Email them & ask
- https://www.toolpost.co.uk/product/sorb ... -851h-855h
or a host of others
- https://www.toolpost.co.uk/woodturning/ ... p-scrapers

 

[Phil Pascoe]

Surely the only important thing is the size of the hole and that shouldn't be too hard to find out , I wouldn't have thought.

 

[mayo.mick]

This was an impulse buy from Axminster, I usually do a bit of research before buying anything new. But for some reason its not very clear (to me anyway) where to get replacement or different shaped cutters for the Henry Taylor "Stott" tool. There seems to be a good selection of cutters for the Sorby system. I'll see if anyone in our chapter has the Sorby system and try the cutters on that. I thought someone might have had the same problem.