C Clive S New member Joined 26 Jan 2016 Messages 3 Reaction score 0 Location Stockport 26 Jan 2016 #1 I have acquired a whitehead belt sander similar to this please could anybody tell me what the slotted screw in the side of the roller is for there is one in each end Thanks Attachments whitehead sander.jpg 240.5 KB roller whithead (480x640).jpg 67.3 KB roller whithead (480x640).jpg 67.3 KB
I have acquired a whitehead belt sander similar to this please could anybody tell me what the slotted screw in the side of the roller is for there is one in each end Thanks
R rosinante Established Member Joined 30 Jul 2009 Messages 112 Reaction score 20 Location kent 26 Jan 2016 #2 Tracking to help keep the belt running true on the rollers,? If not then tensioning, 2 screws in pic , Chris
Tracking to help keep the belt running true on the rollers,? If not then tensioning, 2 screws in pic , Chris
C Clive S New member Joined 26 Jan 2016 Messages 3 Reaction score 0 Location Stockport 26 Jan 2016 #3 Sorry I did not make myself clear. I was asking about the slotted screw in the end of the roller there is one in each end
Sorry I did not make myself clear. I was asking about the slotted screw in the end of the roller there is one in each end
R rosinante Established Member Joined 30 Jul 2009 Messages 112 Reaction score 20 Location kent 26 Jan 2016 #4 Balance?
C Clive S New member Joined 26 Jan 2016 Messages 3 Reaction score 0 Location Stockport 26 Jan 2016 #5 Yes possible but there is one in each end and in the same position. Thinking about it they might be to hold the end caps that make up the roller. but not sure.
Yes possible but there is one in each end and in the same position. Thinking about it they might be to hold the end caps that make up the roller. but not sure.
