Help...Circular saw blade

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Webby

Established Member
Joined
14 Jan 2012
Messages
368
Reaction score
0
Location
Gloucester
have been trying to find a circular saw blade to fit my hand held circular saw

dimensions 190mm od x thickness 2.5mm and about 40 teeth but with a bore of 24mm
the bore seems to be the stumbling block

as any one any ideas please where i may obtain ...have been googling like mad lol to no avail

thanks in anticipation of a result

Dave
 
B&Q Performance Powersaw .....have to say some years old but still going strong just need new blade
 
Did not know that you could fit spacers so now i look for a spacer 24mm to 30mm so i can get blade with a 30mm inside diameter
have had a browse at screwfix catalogue cant see one there.......... spacer that is

so the quest continues lol
 
Reducing bushes are available but....

you need to make sure the thickness of the bush is thinner than the plate of the blade. otherwise the locknut will clamp only on the bush....blade will spin.
I may be able to get 1.8 mm thick ones but not sure what thickness the plate may be on any blade you get.

All the blades I can supply have 1.6 mm plate thickness.

I can get 30 teeth with 20 mm bore and have it opened out to 24 mm.
 

Latest posts

Back
Top