Hanning TK 20S - 005 saw blade removal

[topconker]

Hi Guys,#I Inherited this small tabl top saw a while ago and would like to fit a new balde.
Looking at it I can't see a square on the inner blade arbor to remove the nut, has anyone else got one of these saws that maybe they have the manual I could copy/use?
Cheers,
Phil.

 

[Racers]

You can jam a block of wood into the teeth to stop it turning.

Pete

 

[Distinterior]

Topconker,

There appears to be a small hole in the table top to the right of the blade, directly above the motor arbor.

I think you will find all you will need to do to lock the arbor, is to put a long pin or screwdriver shaft into the hole & and it will lock the blade arbor.

Hope this helps.

Tim.

 

[topconker]

Thanks Guys, I'll take a look tomorrow.
TC

 

[topconker]

Had a look at the hole in the table, it is for lowering or lifting the blade hight.
Took the table off and used a spanner to hold the nut on the arbor and used a piece of timber to gently push the blad around to undo the nut. All went well.
TC