Half dovetail mortise problem

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SMALMALEKI

Established Member
UKW Supporter
Joined
30 Jan 2018
Messages
335
Reaction score
19
Location
Derby
Hi there
I have just finished a new bed for my son. The side rails are connected to headboard and footboard with hidden half dovetail mortise. It was my first attempt in cutting this joints. The dovetails were cut to the width of the boards and 2 cm depth. The mortises were cut 2 cm longer on the far side.
The tenons are sitting well and there is a definite locking in. The problem is a 2-3 mm gap between top of the tenon shoulders and the boards.

I can’t figure out the reason behind it.

Does anybody have a tip or trike to salvage the joints?

Thank you
 

Attachments

  • D79D5F3A-BE82-4EC2-94DD-C945EF2FC71F.jpeg
    D79D5F3A-BE82-4EC2-94DD-C945EF2FC71F.jpeg
    262.9 KB · Views: 81
  • 3E76DDB8-E3EE-4F46-A2BE-A64E50978DB9.jpeg
    3E76DDB8-E3EE-4F46-A2BE-A64E50978DB9.jpeg
    285.3 KB · Views: 80
  • B40DA1D4-2927-47EB-86D7-F470A0E095FD.jpeg
    B40DA1D4-2927-47EB-86D7-F470A0E095FD.jpeg
    166.4 KB · Views: 81
I assume the headboard hasn't warped and the shoulder is cut perpendicular.
You could try inserting the wedge from the back of the headboard.
Or if that doesn't work and you have enough of that tenon protruding, you might try a wedged dowel to help those surfaces meet.
Something like in this picture:
https://cdn.instructables.com/FAG/CZ39/ ... .LARGE.jpg
 
Lucky son ! I think dzj is right. Your wedge helps push the rail down tight but isn't as good as stopping it sliding in and out. Dzj's suggestion stops the joint from opening up.

Sent from my SM-G960F using Tapatalk
 
Wow it worked.
I changed the wedge to outside and the gap is closed now.

He has put his stamp on the work hahaha.
Thank you for your advice.
 

Attachments

  • FAB1CE4D-B222-4DD5-9157-06F938D02DFD.jpeg
    FAB1CE4D-B222-4DD5-9157-06F938D02DFD.jpeg
    228.3 KB · Views: 54

Latest posts

Back
Top