• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Sold Graduate lathes

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flh801978

Established Member
UKW Supporter
Joined
21 Dec 2008
Messages
1,577
Reaction score
200
Location
Sheffield uk
Its with heavy heart that i've decided to sell my graduate lathes
I dont use them as much as i used to
theres lots of stuff for sale here
i'm not in too much of a rush to sell them
they are in my celler workshop so i do need help and time to get them out

So 1. graduate 30 inch bed variable speed with a quality european inverter all buttons start/stop,speed,direction mounted in the standard control panel location single phase 13 amp plug
everything with it .eveything works as it should..£700
2 Graduate shortbed and as above £800

they are as used paintwork but clean and ready to use
i cant get photos of them where they are ) too much clutter round them)but you know what a graduate looks like
lots and lots of accesories available for these but i'll see if these sell and offer all to the buyers of the lathe before listing these but 8 sorby patriot chucks with different jaws mounted...centres faceplates thread cutting attachments chisels all quality brands.
the lathes located in sheffield south yorks
they will fit into an estate car easily
 
Its with heavy heart that i've decided to sell my graduate lathes
I dont use them as much as i used to
theres lots of stuff for sale here
i'm not in too much of a rush to sell them
they are in my celler workshop so i do need help and time to get them out

So 1. graduate 30 inch bed variable speed with a quality european inverter all buttons start/stop,speed,direction mounted in the standard control panel location single phase 13 amp plug
everything with it .eveything works as it should..£700
2 Graduate shortbed and as above £800

they are as used paintwork but clean and ready to use
i cant get photos of them where they are ) too much clutter round them)but you know what a graduate looks like
lots and lots of accesories available for these but i'll see if these sell and offer all to the buyers of the lathe before listing these but 8 sorby patriot chucks with different jaws mounted...centres faceplates thread cutting attachments chisels all quality brands.
the lathes located in sheffield south yorks
they will fit into an estate car easily
I would possibly be interested in 30inch bed.

Regards.

Clive.
 
lots and lots of accesories available for these but i'll see if these sell and offer all to the buyers of the lathe before listing these but 8 sorby patriot chucks with different jaws mounted...centres faceplates thread cutting attachments chisels all quality brands.
the lathes located in sheffield south yorks
they will fit into an estate car easily

I'd be interested in some accessories if the lathe buyers don't take them please. The thread cutting and centres especially.
 
Managed to clear some space round them to get some rough photos
the long bed one has a 1hp motor the short bed has a 2hp motor
the inverters are mounted on the wall behind the lathes
 

Attachments

  • 53EF1E02-F8AF-4536-9AEC-0AECFD44152C.jpeg
    53EF1E02-F8AF-4536-9AEC-0AECFD44152C.jpeg
    286.9 KB · Views: 183
  • A48E556F-BED1-4265-B2AE-1F60C8C3355C.jpeg
    A48E556F-BED1-4265-B2AE-1F60C8C3355C.jpeg
    311.8 KB · Views: 185
  • B5C577AA-F52A-4404-8D2B-991117A939AE.jpeg
    B5C577AA-F52A-4404-8D2B-991117A939AE.jpeg
    287.2 KB · Views: 177
  • 1F324EF8-AE50-4E7F-9C57-32943D6EBB48.jpeg
    1F324EF8-AE50-4E7F-9C57-32943D6EBB48.jpeg
    288.6 KB · Views: 177
  • 66854529-9E65-41B4-9E5F-D1B7F31F6FBC.jpeg
    66854529-9E65-41B4-9E5F-D1B7F31F6FBC.jpeg
    272.5 KB · Views: 169
Hi there, still interested in the lathe , pretty much starting from scratch with the Grad, will you be including any accessories, face plates etc?
 

Latest posts

Back
Top