glue heater

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

GEPPETTO

Established Member
Joined
26 Oct 2004
Messages
340
Reaction score
0
Location
Vinci (FI) - Italy
Hi all,
I have to use hide glue to veneering. I have read that temperature does not have to rise over 60-65 Celsius degrees because at that point the glue loses its features.
I have an electric burner without regulation and I thought to equip the burner with a thermal regulator which turns off the voltage at the right temperature.

But I have some questions: Can I put the regulator attached at the water container where the water will have the same temperature of the glue or I use a regulator with far probe and put the probe into the hot glue?

Please help me, I want to buy the regulator this evening

Thanks in advance
 
Back
Top