Fitted bedroom furniture

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mikefab

Established Member
Joined
14 Jan 2013
Messages
269
Reaction score
18
Location
Hexham, Northumberland
Here are some photos of some fitted furniture I made for my neighbours. It's the first time I've done work for somebody else so it was an interesting experience taking their ideas, building on them / moderating them and turning them into a design for approval.

Timber Ready for face frames

Mikefab-1.jpg


Ripping down some oak for the worktop.

794207e61c11673e3bedec674dba954f.jpg


Stickered in the house for a bit

06820c0f3db55b338b1bcf9705754dcf.jpg


Face frame glued up (sycamore, was very cheap as some mould stains)

543d7df8b6c5420b7ba32cd43b37b4da.jpg


Carcasses in production on the driveway

cabbe7ae99ccee4c67df591d43f23fed.jpg


Face frame test fitted to carcasses in my front hall to allow door fitting.

bd4f440633e4c916b261650ac6749b41.jpg


Solid oak drawer boxes made from local 3/4" northumberland oak (offcuts friends at local joinery firm). Bases from 6mm oak veneered mdf. Drawer sides joined with groove/rebate and PU adhesive. Man the squeeze out was a pain... finished with osmo Poly X.

0c70c299499338718333e2afeccefab5.jpg


03ea3fe4ca152dbb62710177b4914d2e.jpg


Doors glued up from 22mm MR MDF

e3e29b9335d58f840a9143f6e17819f6.jpg


I didn't take any pics during the install apart from this!

631322764db23f82248270a577c7bbb4.jpg


Finished project, all components hand painted prior to install to minimise time and mess on site.

ffde7ece755bcba409a961eb9a33d6b1.jpg


62051faadc35bff59fce6c1419a35e39.jpg


9343210aabdc9d9167f3eb290a5076c2.jpg


fb551637ca8f3860a50fb8b6c7ff70eb.jpg


There was a little touching up of filled nail holes in the skirting after these photos but that's it.

Runners were blum tandem soft close, hinges blum clip top blumotion. Paint was Dulux trade eggshell (oil based by mistake!). Carcasses were Egger MFC (very heavy!!).

Thanks for looking!

Mike
 
Last edited by a moderator:
Very professional fitted furniture.

I probably would have made 2 front frames for ease of making and fitting. Less risk of an Oops moment when it wont go up the stairs.
 
RobinBHM":31yu8duf said:
Very professional fitted furniture.

I probably would have made 2 front frames for ease of making and fitting. Less risk of an Oops moment when it wont go up the stairs.

Thanks very much Robin.

I think I'm with you on using two separate face frames in future. I wanted to achieve a totally seamless look which is why I did it as one frame, but it was a pain at all stages of production and needed handling with care! I think in this case two frames would probably have looked ok because of the change in height at the transition between units.
 
Great job, looks like a professional job. Only thing that bugs me is the handle placement, I would have put them in line with the rails but maybe that's just me.
 
Thanks for the feedback everyone.

Woodmonkey: definitely take your point. Thanks. They did feel a little low when lined up with the the midrails though. The midrails were positioned to line up with the top of the drawers - not sure if this is the usual approach but it made sense to me.
 
To be fair you've got reduced height doors due to the sloping ceiling so you're probably right
 
I've had a question by PM about the models of hinges and runners used. For the greater good I am answering via the thread! Hardware came from M&D Online.

Hinges and mounting plates:

CLIP top standard hinge 71B3750 (71B3750)

CLIP hinge mounting plate - 174E6100.01 (174E6100.01) = £2.10

Runners:
TANDEM BLUMOTION - 550H4000B (550H4000B)

Also, face frames and doors/drawer fronts were 22mm thick.

HTH
Mike
 
As others have said, top job. I particularly like the drawers made from the oak, handy friends you have there!

Terry.
 

Latest posts

Back
Top