goldeneyedmonkey
Established Member
Hello all,
I've got the Senco PC1010 Compressor, coupled with the Nylon Coiled Air Line from Axy & the Axy AW50N Brad Nailer. All of them say that they have 1/4" BSP Quick Release fittings, and they all do, apart from the compressor (even though it says in the manufacturers specs' that it's a 1/4").
So I did some troubleshooting, and the air line connects back onto itself, and it also connect onto both guns that I've got from Axy (I got the headless pinner as well). So I had a look at the compressor's connector and it seems to be too small for the male connector of the hose to fit into. Can I just swap the connector on the compressor for a 1/4" fitting from Axy, part no. 100311? Why would it be smaller? As I had a quick scan through a few sites and I couldn't see any fittings smaller than a 1/4".
Sorry for any ingnorance, not used to air tools. Before this I used the DeWalt 18v nailer.
I would have got some pictures to illustate what I mean, but the charger's gone walkies.
Cheers in advance. _Dan.
I've got the Senco PC1010 Compressor, coupled with the Nylon Coiled Air Line from Axy & the Axy AW50N Brad Nailer. All of them say that they have 1/4" BSP Quick Release fittings, and they all do, apart from the compressor (even though it says in the manufacturers specs' that it's a 1/4").
So I did some troubleshooting, and the air line connects back onto itself, and it also connect onto both guns that I've got from Axy (I got the headless pinner as well). So I had a look at the compressor's connector and it seems to be too small for the male connector of the hose to fit into. Can I just swap the connector on the compressor for a 1/4" fitting from Axy, part no. 100311? Why would it be smaller? As I had a quick scan through a few sites and I couldn't see any fittings smaller than a 1/4".
Sorry for any ingnorance, not used to air tools. Before this I used the DeWalt 18v nailer.
I would have got some pictures to illustate what I mean, but the charger's gone walkies.
Cheers in advance. _Dan.