Festool router guide rail clamp and Trend T11 router

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Popey

Established Member
Joined
4 Apr 2020
Messages
68
Reaction score
68
Location
Swindon
Does anybody know whether the Festool FF-OF-1000 guide rail clamp would work with a Trend T11 router? Would any owners mind telling me the distance between centres on the clamp and the diameter of the guide rods.

thanks very much.

Mark
 
Yes it does. I have a sub base on my T11 which is why it looks a little lumpy, but the base of the Festool guide lines up with the standard base of the T11. Standard rails fit right in - maybe a teensy bit tight when all the way home, but nothing forced. Rods are 8mm dia. 115mm between the extremes. HTH. P 86F54F03-6A21-430A-BFE9-54FED824D2F9.jpeg
F8A6E3EA-DC81-46BE-81AB-490860F39622.jpeg
727FE5CB-B913-4C10-A2BD-637E4A97B49B.jpeg
005AD254-69AA-48A3-9D61-8B96EE33E7EE.jpeg
F5427B11-5276-4947-B3A3-BDB099098A19.jpeg
 
Yes it does. I have a sub base on my T11 which is why it looks a little lumpy, but the base of the Festool guide lines up with the standard base of the T11. Standard rails fit right in - maybe a teensy bit tight when all the way home, but nothing forced. Rods are 8mm dia. 115mm between the extremes. HTH. PView attachment 103975
View attachment 103976
View attachment 103977
View attachment 103978
View attachment 103979
Peter,
that's really useful. Thank you very much.

Best wishes,

Mark
 

Latest posts

Back
Top