• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Erbauer table saw problem

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Rhod

New member
Joined
28 Jun 2020
Messages
1
Reaction score
0
Location
Haverfordwest
As I am not the greatest with electrickery, I thought maybe someone here might be able to help. My table saw, lost power and now fails to even twitch when turned on. It's not the power, it is the machine. Is there an overload switch that I can't see? It's as though the power wants to get through, then shuts off. It was working earlier but not now, suggestions please!!
 

sunnybob

wysiwyg
Joined
11 Oct 2014
Messages
8,399
Reaction score
162
Location
cyprus
Describe "wants to get through".
Is there clicks, hums, sparks :shock:

have you replaced the fuse in the plug?
Is the mains wire free of cuts?
Is the mains wire squashed flat under an edge?

We need details.
 

Myfordman

AKA 9Fingers
Joined
19 Jan 2013
Messages
2,385
Reaction score
158
Location
Southampton area
I'll bet 1/2 pint of best that the brushes have worn down too short. Consistent with a progressive failure trend that eventually just won't go.
 
Top