Einhell 2025 Mitre / T Track Slot Size Issue.

[WelshGuy]

Hello, newbie woodworker here.. and about the setup a work bench and integrate my (cheapo, but good enough for me) Einhell 2025 table saw into it. But i seem to either be having a thick moment or missing something.

I'm looking to buy the T Track to carry on the table saw slots into the workbench, but it seems the slots in the table saw are non-standard?

I've attached some pictures of it, but internal sizes of the table saw slot are
Long Width = 17mm
Short Width = 13mm
Height = 8mm

Checking internal dimensions of "standard T track" is seems
Long width = 24mm
Short width = 19.3mm
Height = 9.8mm

Any ideas where i can get track that matches the table saw one?

Sorry if i'm being thick somehow...

 

[Trigs]

pass, have you tried making some from off cuts?

 

[Orraloon]

The slots in the bench top do not need track in them. They are only clearance for the miter gauge runner or sled runners when they poke out past the back of the saw table.
Regards
John