DWE7485-GB Table saw blade advice

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SCMG001

Member
Joined
12 Mar 2020
Messages
14
Reaction score
1
Location
Shrewton
Recently bought DWE7485-GB and really working well. I wanted to get a blade for cutting plywood finely, and (naively) purchased Dewalt 210mm x 30mm 60T FlexVolt Xtreme Runtime Saw Blade, thinking that this should be ok, as it is for the same saw, except battery operated. (mine is corded) . Fitting the blade, and then running it, I noticed it started slipping, an upon checking could see that it was unable to tighten any further against the blade , as the new blade is thinner than the original one supplied with the machine. Can this be, so little margin for adjustment to tighten?
Just wondering if anyone has had the same experience, would it be safe to add a washer? Alternatively what blade 40t + would you recommend that works well for a DWE7485-GB?
Many Thanks in advance
 

Attachments

  • 1624351200720.png
    1624351200720.png
    11.3 KB · Views: 4
Back
Top