Domino SIPO rods OK for DF500?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

flounder

Established Member
Joined
2 Dec 2009
Messages
257
Reaction score
1
Location
Newport Pagnell
Every site that I have looked at that sells the Sipo rods state that they are for the DF700, but are they equally applicable to the DF500 or does the 700 cut wider mortices meaning they won't fit into a mortice cut by a 500?

Any advice greatly appreciated!
 
As long as the tenon matches the domino cutter it's equally suitable for the 500 or the 700.
 
Back
Top