M Mikegtr Established Member UKW Supporter Joined 18 Jun 2020 Messages 221 Reaction score 18 Location Morpeth 6 Oct 2024 #1 Can you cut intricate shapes into a domed surface--example: a shallow dish 14" diameter by 1 and a half inches deep? Would all scroll saws do this?
Can you cut intricate shapes into a domed surface--example: a shallow dish 14" diameter by 1 and a half inches deep? Would all scroll saws do this?
J Jaco Established Member Joined 15 Dec 2002 Messages 808 Reaction score 1,470 Location Gauteng RSA 7 Oct 2024 #2 Suppose it could be done as long as it will fit under the top arm. I have cut up to 50mm thick stock.
Suppose it could be done as long as it will fit under the top arm. I have cut up to 50mm thick stock.
TRITON Established Member UKW Supporter Joined 5 Oct 2014 Messages 4,372 Reaction score 3,446 Location Sunny Glasgow 7 Oct 2024 #3 Fret saw ?.
J Jaco Established Member Joined 15 Dec 2002 Messages 808 Reaction score 1,470 Location Gauteng RSA 9 Oct 2024 #4 TRITON said: Fret saw ?. Click to expand... 350mm (175mm half) might be too wide for a fret saw? And even some of the scroll saws.
TRITON said: Fret saw ?. Click to expand... 350mm (175mm half) might be too wide for a fret saw? And even some of the scroll saws.
S SammyQ Established Member Joined 12 Apr 2005 Messages 2,745 Reaction score 413 Location A wee house on a hill 9 Oct 2024 #5 Lathe, router, template, patience.