Dewalt DW1150 planner/thicknesser replacement belts

[Petesworkshop]

Hi,
I've recently bought an old Dewalt 1150 planner thicknesser which although is working is showing signs of wear {like me}.
I would like to replace the 2 drive belts { part no. 31865 cutterblock motor belt and part no. 32562 dragging belt} and am wondering weather these are still available?
It looks like the cutterblock drive belt may be an off the shelf belt as I can just make out the letters B32 EP, but the the lettering is so faded with wear I can't make out the full description to be sure of buying the right one.......as for the dragging roller I can't see any markings on it.
Has anyone out there recently replaced either of the belts please, and if so where did you get them.

Many thanks

Pete

 

[Fitzroy]

Pete,

Been out to the shed, the belts are marked

Roller drive : Optibelt 6x500 - the belt may also have a 'CI' marking but can't be certain, it is a toothed belt and roughly 4mm deep.
Cutter Block : Optibelt 10x600 VB belt - its a non toothed V belt.

Fitz.

 

[Petesworkshop]

Hi Fitz,

really kind of you to take the time to send this info to me, I appreciate it.

Kind regards

Pete